Powerful and easy to use, induction hobs unfortunately have one flaw: the fragility of the glass. If your plate has suffered a few scratches, Best Hob Repairs Services in Greater London here is how to erase them or, at least, attenuate them.

The most effective: white toothpaste

Has your superb cooking piano unfortunately suffered one or more scratches? The best-known trick for renovating a scratched induction hob is to use simple toothpaste.

• Use the most basic white toothpaste possible (colored or gel toothpastes do not work).

• Place a small amount of toothpaste directly on the plate.

• Gently rub with a clean, dry cloth until the scratches disappear.

• Remove toothpaste residue with a damp sponge and dry well.

This trick works great on shallow scratches.

The natural trick: baking soda

• Make a paste by mixing baking soda and water. One tablespoon of each ingredient is enough.

• Mix the mixture carefully with a spoon to avoid lumps.

• Dip the corner of a clean, Best Hob Repairs Services in Greater London dry cloth into the mixture and gently rub the exposed scratches.

• For an optimal result, apply enough material so that the plaque appears white on the surface and rub in concentric circles.

• Wipe the baking soda residue on the induction hob with a damp sponge.

Erase scratches with polish

Automotive polish is also effective for removing scratches from an induction hob . Preferably choose a fairly mild product (for superficial scratches) and do a test on a small part of the plate to make sure that the product is not too powerful.

• Place a dab of polish on a microfiber cloth.

• Gently buff the scratched area in circular motions, Best Hob Repairs Services in Greater London without pressing too hard.

• Remove excess product with a clean cloth.

• Let the product act on the scratches for a few minutes, then clean the plate.

Stubborn stain: try metal cleaner or clay stone

In the event of a stain or burn on an induction hob , the best trick is to use a clay stone or metal cleaner.

• Soak a cloth in hot water and leave it on the dirt for 30 minutes to loosen it as much as possible.

• With clay stone: vigorously rub the stain, then rinse with clear water before drying well.

• With metal cleaner: pour a few drops on household paper and rub thoroughly.

• Be careful though: the metal cleaner is very effective, but risks erasing the inscriptions engraved on the plate. Never use it on the control panel.

Change the glass

Cleaning your induction hob with an overly abrasive sponge can leave scratches on the hob, but these generally remain superficial. The problem is quickly solved with a polish used to erase scratches on a car. On the other hand, Best Home Appliance Repair Company in Leicester you must resort to a more radical solution if the scratch is very deep or if the glass of your plate has cracked due to a major shock.

To replace the glass, get the coating compatible with the dimensions of your plate. Then unscrew the defective glass before replacing the new part. The easiest way is to hire a professional repair service to get a perfect result.

Avoid scratches on an induction hob

To keep an induction hob in good condition, the best tip is to avoid scratches beforehand.

• Always clean your plate with a soft sponge, without using the scraping side.

• Avoid abrasive products that may create micro-scratches.

• Clean your plate regularly to avoid the accumulation of dirt.

• Always check that the underside of the pots and pans you use is smooth and free of small impurities, such as a grain of salt, which can be enough to scratch the surface of an induction hob.